For most new starters, the first day is a blur of names, logins and paperwork. For someone joining a chemical plant, a distribution centre or a rail depot, it is also the day they first set foot in a place that can genuinely hurt them. They are expected to absorb the layout, the evacuation routes, the exclusion zones and the quirks of the building alongside everything else, usually with a supervisor who also has a shift to run. Matterport onboarding, delivered through FabricAcademy's Virtual Environments, lets them walk the site before day one instead.
Absorbing all of that on day one is a lot to ask, and the risk data reflects it. The Health and Safety Executive states that workers are as likely to have an accident in their first six months at work as during the whole of the rest of their working life. Earlier HSE research into injury rates found the risk of workplace injury is four times higher for workers in their first month with a new employer than for those who have been in their job for at least a year.
Pre-start onboarding with Matterport facility scans tackles one specific part of that problem: unfamiliarity with the physical environment. It gives people the chance to learn the site before they ever arrive.
The site is the hardest part of induction to prepare for
Most onboarding content travels well. Policies, systems training and compliance modules can all be completed from a laptop in the weeks between offer and start date. The physical workplace cannot, and that is exactly where the danger sits.
HSE's new starter guidance lists unfamiliarity with site layout, especially where hazards change from day to day, as one of the reasons new workers get hurt. Its advice for a health and safety induction is practical: walk new workers around the site, show them where the main hazards are, and include photos of hazards where possible.
The walk-round works. The trouble is that it is often the first and only time a new starter sees the space before working in it, and the conditions for delivering it well are rarely ideal:
- The site may be remote. Offshore installations, rural plants and depots can be hours away, so there is no casual "come and have a look round" before day one.
- Access may be restricted. Control rooms, cleanrooms and secure areas often cannot admit anyone until clearances, medicals or PPE fittings are complete.
- Operations do not pause. A live control room or a busy loading bay is a poor place to stop and explain things.
- The workforce is spread across sites. In a multi-site workforce, inductions vary by location, by who is on shift and by how busy the day is.
The result is that physical familiarisation gets compressed into the first day or two, delivered once, by whoever is available. This sits inside a wider onboarding gap. Gallup reports that only 12% of employees strongly agree their organisation does a great job of onboarding new employees, and that new hires typically take around 12 months to reach their full performance potential. Any part of that journey that can safely start earlier is worth moving.
What a Matterport scan actually gives you
Matterport uses 3D cameras to capture a real space and turn it into a photorealistic, measurable Matterport digital twin. The result is not a rendered model or an artist's impression. It is the actual building, with its real signage, real clutter and real sightlines. We explain why that accuracy matters for learning in digital twin training: walk the site before you work on it.
The scan can be explored in walkthrough mode, as a "dollhouse" view of the whole structure, or as a floor plan. Crucially for onboarding, Matterport Showcase runs in any web browser. A new starter can open a link on a laptop, tablet or phone and move through the space at their own pace. No headset, no software installation and no IT ticket.
That makes the scan a natural foundation for a virtual site induction. Within FabricAcademy's Virtual Environments capability, facility scans become structured learning spaces rather than static tours. Points in the space can be tagged with information about hazards, muster points, fire exits, isolation points and PPE zones, and the walkthrough can be paired with knowledge checks so that learning is confirmed, not just viewed.
This approach is already proving itself outside industrial settings. The University of Manchester built a virtual induction module from Matterport scans of its music and drama centre, which students complete, including a quiz, before they can use the rehearsal rooms. The university found the digital twin helped students get familiar with the space and reduced apprehension. The same principle applies with far higher stakes on an industrial site.
Where Matterport onboarding makes the biggest difference
Scanned replicas are most valuable where the environment is complex, the risks are real and early access is difficult.
Control rooms. New operators can learn the layout of panels, alarm stations and emergency stops, and where colleagues sit, without anyone interrupting live operations. Arriving already knowing where things are frees their attention for the procedures that matter.
Warehouses and distribution centres. HSE's warehousing guidance is clear that sites must be organised so pedestrians and vehicles can circulate safely. A scan lets new starters trace marked walkways, loading bays, racking aisles and crossing points before they share the floor with forklifts. For warehouse safety, knowing where you are allowed to walk is the first lesson, not the tenth.
Vehicles and mobile plant. Cabs, train interiors, ambulances and service vehicles can all be scanned. Staff can locate emergency exits, fire extinguishers, first aid kits and equipment stowage before their first shift. HSE's workplace transport guidance stresses careful planning of how vehicles and people move around a site, and a scan makes that plan visible.
Multi-site estates. When the same role exists across ten depots, a scan of each site means every new starter gets the same baseline familiarisation, wherever they are based and whoever is on shift. Agency and temporary workers, who often arrive with the least notice, benefit most.
Why browser-based matters more than headset-based
There is a place for headset VR in immersive training, particularly for practising tasks that involve physical movement and decision-making under pressure. For pre-start familiarisation, though, a headset adds friction at exactly the wrong moment.
Someone who has not yet started has no company device, no IT account and no one to help them set up hardware. Posting headsets to new hires raises questions about procurement, hygiene, charging, data security and returns. Some people also find headsets uncomfortable or disorientating.
Browser-based training removes all of that. The link can go out in the offer pack or welcome email, and the new starter can explore on whatever device they have. Where a headset is available, Matterport also supports VR viewing through the WebXR standard, so the same scan can be used in both modes without rebuilding anything.
A practical pre-start sequence
The aim is not to replace the physical induction. Under the Management of Health and Safety at Work Regulations 1999, employers must provide adequate health and safety training when people are recruited, and the in-person walk-round remains a core part of that. Pre-start scans make the walk-round more effective by turning it into confirmation rather than first contact.
A simple sequence looks like this:
- Offer accepted. The welcome email includes a link to the scan of their site, with a guided route covering the entrance, welfare facilities, their work area and the nearest emergency exits.
- The week before. A hazard-spotting walkthrough with a short knowledge check, so the new starter arrives knowing the muster point, the pedestrian routes and the no-go areas.
- Day one. The physical walk-round reinforces what they have already seen. The supervisor can spend less time on "where things are" and more on checking understanding, which is the final step in HSE's six-step approach to protecting new starters.
- Ongoing. When layouts change, the site is re-scanned and the training updated, so refreshers reflect the building as it is now, not as it was at launch.
Measuring whether it works
As with any learning programme, the value lies in what changes, not in how many people clicked the link. Scan engagement and quiz scores are a starting point. The more useful measures connect to operational outcomes: time to competency for new starters in critical roles, near misses and incidents within the first 90 days, and how quickly supervisors sign off independent working.
Comparing cohorts who completed pre-start familiarisation with those who did not gives a clear, defensible view of whether the approach is improving hazard awareness and safety in practice. It also gives L&D a stronger case to bring to the budget conversation.
The first walk-round shouldn't be the first look
New starters are at their most vulnerable in a building they do not yet understand. Scanned replicas let them close that gap in the days before they arrive, from a browser, at their own pace, so that day one becomes about confirming what they know rather than taking it all in at once.
FabricAcademy's Virtual Environments capability turns Matterport facility scans of control rooms, warehouses, vehicles and sites into structured pre-start learning. Find out how it works.
Explore Virtual Spaces →